Search

Beef & Lamb Standards

ENVIRONMENT Version 5.0 (modified)

Click to view

Glossary

Key – Those standards which have greater significance (all other standards are normal)

Recommendation – Those which do not affect certification

New – A completely new standard which the member must now adhere to

Revised – A standard that has changed and requires the member to take some different or additional action to before

Upgraded – The standard has been upgraded to a Key standard or from a Recommendation to a full standard

Appendix – Referenced in ‘How you will be measured’. Indicates that additional information is provided in the Appendices, which are available at the end of each section.

R This icon indicates that a record is required.

B.EC.1 Key

Potential pollutants must be stored in a manner that minimises the risk of contamination and pollution to crops, feedstuffs, animals, soils, groundwater and watercourses

How you will be measured

B.EC.1.a

Fuel tanks are bunded where required by legislation (see Appendix)

B.EC.1.b

Agrochemicals are kept in a well-maintained store which allows for containment of any spillages

B.EC.1.c

Manufactured fertiliser is stored on a hard, dry surface

B.EC.1.d

Fertilisers that pose a combustion or oxidiser hazard are stored in accordance with the Safety Data Sheet

B.EC.1.1 Key

Organic manures must be stored in a manner that minimises the risk of contamination and pollution to crops, feedstuffs, animals, soils, groundwater and watercourses

How you will be measured

B.EC.1.1.a

Organic manures (not including storage within a building) are not stored: - within 10m of inland freshwaters or coastal waters - within 50m of a spring, well or borehole - where there is significant risk of runoff entering watercourses

B.EC.1.1.b

Manure heap (not including field heaps) effluent runoff does not enter a watercourse, either directly or through land drains, roads, tracks or other pathways

B.EC.1.1.c

Where manure is stored in temporary field heaps, these must be moved at least every 12 months

B.EC.1.1.d

Slurry tanks, reception pits, pipes and channels are impermeable

B.EC.1.1.e

Above ground slurry stores with a pipe for emptying are fitted with at least two functioning valves (one of which can be the nozzle), locked when not in use.

B.EC.1.1.f

Reception pits can hold 48 hours' production including likely rainfall on all surfaces draining into the pit

B.EC.1.1.g

The combined available capacity of slurry tanks, pits, compounds and lagoons have sufficient capacity for slurry storage of: - at least 4 months in non-NVZ areas - at least 5 months in NVZ areas

B.EC.1.1.h

There is a documented up-to-date calculation of slurry storage requirements
R

Documented slurry storage requirement calculation

B.EC.1.2 Key

Silage must be stored in a manner that minimises the risk of contamination and pollution

How you will be measured

B.EC.1.2.a

Silage is made and stored at least 10m from watercourses and at least 50m from springs, wells and boreholes.

B.EC.1.2.b

Silos have an effluent collection system

B.EC.1.2.c

Effluent from baled silage does not leak into water source

B.EC.1.2.d

Field silage effluent is contained

B.EC.1.3

Slurry pits/lagoons must be fenced for animal and personnel safety

B.EC.2

In the case of packaging breakages potential pollutants must be transferred to a suitable container

How you will be measured

B.EC.2.a

Container has an appropriate safe closure cap or bag tie

B.EC.2.b

The original label information is displayed

B.EC.3

Nitrogen based fertilisers must be stored in a way that minimises the risk of theft

How you will be measured

B.EC.3.a

Is stored where there is no public access

B.EC.3.b

Product is either not stored close to, or is not visible from, a public highway (covering or sheeting is an acceptable way of ensuring the product is not visible)

B.EC.3.c

Checks are made to ensure manufactured fertiliser has not been tampered with, moved or stolen

B.EC.3.d

Any theft or losses are reported to the police immediately (Tel: 101)

B.EC.4 Key

PPPs must be appropriate for their intended use

How you will be measured

B.EC.4.a

Manufacturer’s instructions are followed

B.EC.4.b

PPPs are approved for use

B.EC.4.c

Unapproved product is kept in a segregated area of the pesticide store, pending collection for disposal at the earliest opportunity; clearly marked with signs/labels stating that it must not be used

B.EC.5 Key

PPPs must be applied in a manner that minimises the risk of contamination and pollution

How you will be measured

B.EC.5.a

PPP application does not occur in areas of high pollution risk, as identified on farm map

B.EC.5.b

PPP application does not occur in unsuitable conditions e.g. when there is a risk of drift or where soil conditions are unsuitable e.g. waterlogged, flooded or snow-covered soil or where the soil has been frozen for more than 12 hours in the previous 24 hours

B.EC.5.c

Buffer zone requirements of the PPP being applied are complied with

B.EC.6

PPP application must be undertaken by competent operators

How you will be measured

B.EC.6.a

NPTC Pesticide Application Certificates/Lantra Awards Level 2 Pesticides qualification
R

NPTC/Lantra certificates

B.EC.7

All PPP application equipment must be maintained and tested

How you will be measured

B.EC.7.a

Frequency of testing is carried out as follows: - all new trailed/mounted/self-propelled sprayers are NSTS tested before they are 5 years old - subsequently trailed/mounted/self-propelled sprayers with a boom width over 3m are NSTS tested once every 3 years - subsequently trailed/mounted/self-propelled sprayers with a boom width of 3m or under and other application equipment (slug pellet, micro-granular applicators, weed wipers) are NSTS tested once every 6 years - knapsack, handheld and pedestrian equipment does not require an NSTS test but should be checked by the operator at least annually

B.EC.7.b

Equipment calibration occurs at least annually
R
  • NSTS Certificates
  • Calibration records

B.EC.8

Records must be kept of all PPP applications

How you will be measured

B.EC.8.a

Records include: - field identifier - crop/variety - date and time applied - justification/target for application - product name and active ingredient - rate of application - water volume - name of sprayer operator - grazing/harvest interval - total area - wind direction and speed - first permissible harvest date

B.EC.8.c

Records are kept for at least 3 years
R

PPP application records

B.EC.8.1

It is recommended where PPPs are used on crops an Integrated Pest Management (IPM) plan is completed

R

IPM plan

B.EC.9 Key

Manufactured fertilisers and organic manures must be applied in a manner that minimises the risk of contamination and pollution

How you will be measured

B.EC.9.a

Any materials, including waste materials, that are applied to land should have agricultural benefit

B.EC.9.b

Exemptions/permits to use waste materials are held

B.EC.9.c

A Manure Management Plan (MMP) is kept and followed when applying organic manures to land

B.EC.9.d

MMP includes, at least: - where and when manure can/cannot be applied (detailed on a map) - calculations of total area required to apply organic manure - details of Total Spreadable Area available and outlets for any excess organic manure

B.EC.9.e

Before application the following factors are considered: - NVZ restrictions - soil type - soil condition - crop requirements - slope - weather conditions - the location of watercourses - water supplies and abstraction points (including on neighbouring land)

B.EC.9.f

Applications are not carried out during high risk times e.g. on waterlogged, flooded or snow-covered soil or where the soil has been frozen for more than 12 hours in the previous 24 hours

B.EC.9.g

Biosolids are assured under the Biosolids Assurance Scheme

B.EC.9.h

Untreated sewage sludge, untreated abattoir or catering derived animal by-products are not applied

B.EC.9.i

Applications are made in accordance with Appendix
R
  • Exemptions/permits
  • Manure Management Plan (or records detailing required information)

B.EC.10

All manufactured fertiliser application equipment must be maintained and calibrated at least annually

R

Calibration record

B.EC.11 Key

All wastes which cannot be utilised are disposed of in a manner that minimises the risk of contamination and pollution

How you will be measured

B.EC.11.a

Wastes are disposed of by a registered waste carrier

B.EC.11.b

Wastes are not burnt, with the exception of vegetation and untreated wood

B.EC.11.c

Empty PPP containers are: - cleaned using an integrated pressure rinsing device, or triple rinsed appropriately and the rinsate returned to the spray tank - stored securely - not reused - returned to the supplier or where non-returnable, disposed of via a registered waste carrier

B.EC.11.d

Redundant PPPs are disposed of via the supplier or a registered waste carrier
R
  • Waste transfer notes
  • Waste carrier name and registration number

B.EC.12

Waste sheep dip must be dealt with in a manner that minimises the risk of contamination and pollution

Where to find help

More Standards

Guidance
  • EC.1 – Potential pollutants include but not limited to, PPPs*, manufactured fertilisers, fuel oil, empty containers, disinfectants, rodenticides, dairy chemicals, sheep dip
    *PPPs are defined as any product with a current MAPP number
  • EC.1.1 – Watercourse = includes, water courses (ditches, streams, rivers), ponds, lakes, reservoirs, canals, estuaries, coastline
    Organic manure = livestock manures, sewage sludge/ biosolids, compost, digestates, organic industrial wastes
    Risk factors which could lead to runoff, which should be taken into account are: slope (especially if greater than 12 degrees), ground cover, proximity to watercourses or wetlands, weather conditions and forecasts, soil type and condition, presence and condition of land drains
  • EC.10 – Annual field calibration and records are acceptable
  • EC.11 – In order to transport your own waste you must be registered (free of charge) as a low tier waste carrier: https://www.gov.uk/register-renew-waste-carrier-broker-dealer-england
    Opportunities are considered for:
    – reducing the production of waste
    – reusing waste (where appropriate)
    – recycling waste, plastics in particular
Residency Calculator

Beef & Lamb templates, examples & guides